Description
This was produced for the 1986 Gottlieb Genesis pinball, as the original apron was rusted out.
It has a slight micro metallic look.
As pictured, you will have to measure and trim the decal to fit. This will work with other Gottlieb aprons too.
You will have to cut out the ball shooter guide from the main decal, but leave enough to cover the drain lane edge of the apron.
It is printed on a “3M Controltac” product, which lays down super easy. The ink will not breakdown under UV rays.
It could be used on other Gottlieb titles, where your apron needs a refresh.