Return Lane 3″ Machine Screw for Data East Williams Bally Lane Guide Hardware

$1.79 CAD

38 in stock


These are used extensively on Data East, Williams, and Bally.

They hold down the flipper return double stacked lane guides, and artwork plastic.(see photo gallery)

Usually they screw into a tee nut on the underside of playfield.

Between the left and right side return lanes, in total 6 are used.

The assembly line used locktite on these, as a result on a playfield teardown usually 1 or more break, or bend.

I always change them all out with these new 6/32 x 3″, and don’t forget to add some matching t-nuts, as many strip out of the playfield during removal, due to the locktite.

Additional information

Weight.001 kg
Dimensions8 × .01 × .01 cm


If you have any questions about any of our products, don’t hesitate to reach out! You can also give us a call at 1-306-955-6636.