Description
Flipper High Current End of Stroke (EOS) switch used on the Bally Linear flipper assemblies.
Used from 1980 Rolling Stones to 1988 Truck Stop (upper flippers only)
NOTE: Sometimes for a proper fit in a Bally linear, you need to remove the last stack wafer (closest to switch mount bracket), then trim off the excess machine screw isolator tubes, flush with the wafer stack.
These will fit in a Gottlieb from 1976 Surf Champ to 1987 Spring Break, but you may have to add a couple stack wafers to achieve proper distance.
They are used on later Gottlieb’s too, up to the end of production, usually within an assembly, but you can solder the capacitor leads directly to the main solder lugs.
2-1/4″ long from edge of stack, to end of blade. (solder lugs excluded)
Gottlieb: B-16363
Bally: ASW-A20-34 (this is a sub, slight mod needed, noted above)
