Well this project is almost wrapped up.
Within the next few days I will be testing the Solenoid, Lamps, and Switch systems, then building out the upper playfield.
Below are some photos of the stages of work required to get to this point.
This pin comes from the era of the dreaded Williams 1-piece flipper base assembly, meaning, the coil stop is part of the unit, and does not detach; it’s a poor design.
If you have them in your pin, know that they can be changed to the new style, as you see here in the 1 photo.
Changing them out will make serving your flippers much easier in the future.