Description
This kit will fit Bally from 1975 Hi Deal up to and including 1980 Space Invaders.
Notes: The existing screws (if original) that tighten down the EOS switch are to long for the replacement, so keep 3 fiber wafers, and the metal tang from the old switch, and add them in front of the new switch. (see photo gallery) This will eat up the extra screw length.
I’m including a flipper bat (C-611-5) in this kit, as most are cracked, and people forget to order them.
You need to use your original Shoe/Shaft A-2747-11
The kit’s part numbers will be listed below. You can then choose to order the kit, or record the part numbers you require and, order individual parts.
YOU CAN CHOOSE TO ORDER A SET (LEFT & RIGHT) AND/OR INDIVIDUAL LEFT/RIGHT KITS (For upper flippers)
Included:
1) A3711-2 (Left) OR A3711-3 (Right) Enhanced Pawl
2) A-613-67 Coil Stop. (with mounting hardware)
3) ASW-A20-23 EOS Switch.
4) A-3714-3 Plunger (1-7/8″) & Link.
5) C-649-53 Nylon flipper shaft bushing. (with mounting hardware)
6) C-611-5 Flipper body.
7) P-1158-6 Spring Washer.
8) 10-135 Plunger return spring.
9) A-5064 Coil Sleeve. (1-5/8″)
Optional:
1) P-6264-134 Flipper assembly base plate (used)
2) P-108-53 Forward coil bracket. (used)
3) P-137-3 EOS switch mounting bracket. (used)
4) P-6665-444 Plunger stop bracket. (used)
5) ASW-A10-41 Left/Right Cabinet flipper switch. (often overlooked, and worn out)
Contact me for any of the above USED listed optional parts, a most are not yet on the site.
