Description
These are sold in sets of 2.
Used at the rear edge of the main cabinet body, as vent hole covers.(See Photo Galley)
Usually mount on the inside of cabinet.
They measure 3″ x 2-1/2″
Often missing, or bent out of shape.
Most manufactures changed to a flimsy plastic lower cabinet vent cover in around 1987.
On 95% of all the restorations/repairs that I do, the plastic cover is destroyed.
You can paint them, or even powder coat them, if you wish.
On Williams titles these were used as far back as the early 1970’s until the end of production.
Some may show very light surface rust.
