Description
If your refurbishing, or have refurbished your pinball, then this is a great addition; as it adds that final touch.
These have been sandblasted, and powder coated with a metallic silver/grey.
This fits the last generation of Gottlieb Electrical Mechanical (EM) pins.
Starting with 1975 Gold Strike up the start of electronic in 1977.
It has the longer length handle, that measures 6″ long.
Note the differences, as the dimensional sizing is the same!
–This one has rolled edges on the left and right ends to accommodate a lid that slides forward for removal.(For EM’S)
–This handle measures 6″ long, they are only 4-1/4″ on the unit that fits the System-1 & Star 80’s.
–The handle on this unit sits much higher on the front, starting 1-5/8″ from the bottom, compared to the System-1 & Start 80’s version which starts at 3/4″ from the bottom edge.
I offer a refinished coin box for the “System-1 & Star 80’S version as well.
NOTE: If you try to put a EM version in a System-1 or Star 80 Series pin, it will fit, but you won’t be able to close the coin door, as the handle sits too high.
BUT, either version will fit into a EM.
THEY MEASURE 11″ WIDE, 8-1/4 DEEP (9-1/8″ INCLUDING HANDLE), 4-3/4″ TALL AT THE BACK, & 3-7/8″ TALL AT THE FRONT
