Data East 1993 Jurassic Park to 1995 Sega Baywatch Flipper Rebuild Kit

$48.98 CAD

Description

This Data East / Sega flipper rebuild kit fits 9 produced Fliptronic titles.

Data East–Jurassic Park, Last Action Hero, TFTC, Tommy, Guns N Roses, & Royal Rumble.

Sega–Maverick, Frankenstein, & Baywatch.

Notes:

Data East added a low voltage EOS back into the fliptronic system, starting with Jurassic Park. (although I have seen a couple without).This switch is not found on upper flippers, just lower left and right. This switch has a bend on the long blade, some manuals show it without such.

Jurassic Park, and Last Action Hero’s flippers used the common 535-5279-00 crank stop bracket, which accepted the common 545-5105-00 rubber stop/bumper. From Tommy up to, and including Baywatch 535-5279-01 crank stop bracket was used, and this accepted the 545-5445-00 square snap in nylon stop/bumper. You can choose what you need, in the drop down.

Both the left & right crank arms had “Spring Mount” extensions added (535-6663-02 / 535-6663-01)  during this time. Due to high zinc content (poor metal) in time, the spring will slice through the metal; to fix this you can use JB Weld, and the spring will not wear through. At this time I cannot source the spring mount part.

For proper flipper rotation, this era of Data East should have a tapered plunger link, not oval!

This kit will work for both left, or right side, just flip the “crank ” over. (see photo gallery)

The kit’s part numbers will be listed below. You can then choose to order the kit, or record part numbers you require, and order individual parts.

If you have weak flippers I do suggest that you order new flipper bat/shaft (white or yellow), and change them when you rebuild your flippers. Part numbers can be found under “Optional Parts” list.

One kit rebuilds one flipper. Remember, is will fit left or right!

Last 2 photos show optional parts.

Included:

1)  515-5051-00 One crank/plunger/link assembly, consisting of the following: a) A-10656 Plunger & link.  b)  530-5070-02 Crank Arm.  c) 530-5139-00 Metal Link Bushing, d) 545-5084-00 Red actuator cap.

2) 515-5346-00 Coil Stop (mounting hardware included)

3) 180-5124-01 EOS switch.

4) 545-5070-00 Nylon Flipper Shaft Bushing (mounting hardware included)

5) 265-5029-02 Return spring.

6a) 545-5105-00 Rubber round stopper, OR….

6b) 545-5445-00 Nylon square stopper.

7) 03-7066-5 Coil Sleeve 2-3/16″

8) 269-5002-00 Spring Washer

 

Optional:

1) 515-5077-01 / 515-5077-02 Left & Right flipper base plate.

2) 515-5133-01 / 515-5133-02 White/Yellow flipper.

3) 535-6453-00 Forward coil mount. (not pictured)

4) 535-6663-01, 535-6663-02 Left / Right spring bracket (not pictured)

Additional information

WeightN/A
DimensionsN/A
Crank Stop

Round Rubber, Square Nylon

Inquiry

If you have any questions about any of our products, don’t hesitate to reach out! You can also give us a call at 1-306-955-6636.