Description
This Gottlieb flipper rebuild kit fits all the titles starting with the 1989 Bone Busters, up to and including 1992 Super Mario Brothers.
NOTE: With Super Mario this kits only fits if the serial number is less than 90501, greater than you need the later kit (last produced)
NOTE: Here I offer the EOS switch, and the 2.2uf capacitor independent of the mount bracket. Use the existing bracket, and change the parts. Your original switch will have 2 extra solder lugs just for the capacitor leads. The capacitor leads can be soldered onto the switch wire leads, just like they are on Bally/Williams.
This kit includes topside playfield flipper bats, which most do not. These are often overlooked, but should be changed.
The kit’s part numbers will be listed below. You can then choose to order the kit, or record part numbers you require and order individual parts.
The last photo shows some of the optional parts!
As this kit is not Left/Right specific (except for the optional base plate) you can choose to order a pair, and/or individual, if you dealing with a 3-flipper game.
- 25956 Plunger & Link
- 25958 Coil Stop (with mounting hardware)
- B-16363 EOS Switch
- XO-995 2.2uf NP Capacitor (with zip ties)
- 25961 Bushing/Bearing (with mounting hardware)
- 26739 Return Spring
- FA-605 Spring Washer
- A-5065 Coil Sleeve
- 25972 Flipper Bat Body
Optional parts:
- 26494 Shoe/Shaft (New)
- 26014 / 26013 Left/Right Lever/actuator/pawl (not pictured)
- 17184 Forward stop bracket (not pictured)
- 16356 Forward coil mount (used)
- 27330 / 27339 left/right base plate (not pictured)
- 13151 Red or Yellow flipper rubber (New)
