Bally Linear 1980 Rolling Stones to 1988 Truck Stop Flipper Rebuild Kit

$49.48$98.96 CAD

Description

Here is a flipper rebuild kit for the Bally Linear Flipper which was first used on the 1980 Rolling stones title.

It was used up to the 1988 Truck Stop pin, but only on the upper flippers.

NOTES: This flipper system does not have the traditional plunger link, as the lever/pawl is the link, specifically the round Nylon plunger actuator. (see photo gallery) This is the point that wear will occur, and cause flipper slop.  One part that I do not include in the kit is the plunger (S-496-217) as it’s usually good, unless the “Actuator” wore down to metal, and chewed it up. If that’s the case the damage will be visible. As with any plunger you may need to file burrs off the end that hits the coil stop.   I’m including a flipper bat (C-611-5) in this kit, as most are cracked, and people forget to order them.   Also, under Optional parts (see photo gallery) will be a secondary “Form-a-Switch” which can be stacked behind the EOS, and is used to activate a upper flipper(s).

This kit does not work for 1981 “Medusa” or 1985’s “Eight Ball Champ”

The kit’s part numbers will be listed below. You can then choose to order the kit, or record the part numbers you require and, order individual parts.

YOU CAN CHOOSE TO ORDER A SET (LEFT & RIGHT) AND/OR INDIVIDUAL LEFT/RIGHT KITS (For upper flippers)

Included:

1) A3711-4 (Left) OR A3711-5 (Right) Lever / Pawl

2) A-613-127 Coil Stop. (with mounting hardware)

3) ASW-A20-34 EOS Switch.

4) C-649-53 Nylon flipper shaft bushing. (with mounting hardware)

5) C-611-5 Flipper body.

6) P-1158-6 Spring Washer.

7) SP-100-363 Plunger return spring.

8) C-537-8 Nyliner 5/16″

9) A-5064 Coil Sleeve. (1-5/8″)

 

Optional:

1) P-6264-134 Flipper assembly base plate (used)

2) P-108-53 Forward coil bracket. (used)

3) P-6665-636-(left) OR P-6665-637-(right) Plunger stop bracket. (used)

4) ASE-982-1286 EOS Switch Bracket. (used)

5) ASW-A10-45 Form-a-Switch (New)

6) ASW-A10-41 Left/Right Cabinet flipper switch. ( New-often overlooked, and worn out)

Contact me for any of the above USED listed optional parts, a most are not yet on the site.

 

 

Additional information

WeightN/A
DimensionsN/A
Full Set | Left | Right

Left & Right (Set), Left, Right

Inquiry

If you have any questions about any of our products, don’t hesitate to reach out! You can also give us a call at 1-306-955-6636.