Description
If your refurbishing, or have refurbished your pinball, then this is a great addition; as it adds that final touch.
These have been sandblasted, and powder coated with a metallic silver/grey.
Because the handle is missing this will fit Gottlieb Electrical Mechanical(EM) System-1, and Star-80 series pins.
This example is missing the lid, and the handle.
The photo gallery has a few photos (last 3) that will show the differences between the two versions of this Gottlieb Coin Box.
Note the differences, as the dimensional sizing is the same!
–This one has rolled edges on the left and right ends to accommodate a lid that slides forward for removal.(For EM’S)
–This handle(missing) measures 6″ long, and only 4-1/4″ on the unit that fits the System-1 & Star 80’s.
–The missing handle on this unit would have sat much higher on the front, starting 1-5/8″ from the bottom, compared to the System-1 & Start 80’s version which starts at 3/4″ from the bottom edge.
I offer a refinished coin box for the “System-1 & Star 80’S version as well.
NOTE: If you try to put a EM version in a System-1 or Star 80 Series pin, it will fit, but you won’t be able to close the coin door, as the handle sits too high.
BUT, either version will fit into a EM.
THEY MEASURE 11″ WIDE, 8-1/4 DEEP (9-1/8″ INCLUDING HANDLE), 4-3/4″ TALL AT THE BACK, & 3-7/8″ TALL AT THE FRONT
